<form id="frrht"><meter id="frrht"><font id="frrht"></font></meter></form>

              <cite id="frrht"><form id="frrht"></form></cite>

                    <span id="frrht"></span>

                      <track id="frrht"><font id="frrht"><address id="frrht"></address></font></track>

                      Songhan Plastic Technology Co.,Ltd.
                       POLYMER SEARCH

                      Ineos ABS Triax?? 1315 GF ABS + Polyamide Blend (DAM)

                      Category Polymer , Thermoplastic , ABS Polymer , Nylon
                      Manufacturer Ineos ABS
                      Trade Name Triax?
                      Port Shanghai port,China
                      Trade Terms FOB, CFR, CIF
                      Payment Terms L/C, T/T, Western Union
                      Download PDF Ineos ABS Triax?? 1315 GF ABS + Polyamide Blend (DAM).pdf
                      Price EMAIL US    sales@www.akotv.net
                        Online Service   lookpolymers   27660005
                      Material Notes:
                      Key Features:Contains FillerSuitable processing methods:Injection molding
                      Physical Properties Metric English Comments
                      Density 0.995 g/cc
                      0.0359 lb/in?3
                      Melt
                      1.17 g/cc
                      0.0423 lb/in?3
                      Water Absorption 3.8 %
                      3.8 %
                      Moisture Absorption at Equilibrium 1.3 %
                      1.3 %
                      23?°C/50% R.H.
                      Linear Mold Shrinkage, Flow 0.0040 cm/cm
                      0.0040 in/in
                      Linear Mold Shrinkage, Transverse 0.0035 cm/cm
                      0.0035 in/in
                      Melt Flow 3.0 g/10 min

                      @Load 5.00 kg,
                      Temperature 260 ?°C
                      3.0 g/10 min

                      @Load 11.0 lb,
                      Temperature 500 ?°F
                      Mechanical Properties Metric English Comments
                      Tensile Strength, Ultimate 82.0 MPa
                      11900 psi
                      Elongation at Break 4.0 %
                      4.0 %
                      Tensile Modulus 4.80 GPa
                      696 ksi
                      Charpy Impact Unnotched 3.60 J/cm?2
                      17.1 ft-lb/in?2
                      3.60 J/cm?2

                      @Temperature -30.0 ?°C
                      17.1 ft-lb/in?2

                      @Temperature -22.0 ?°F
                      Charpy Impact, Notched 1.00 J/cm?2
                      4.76 ft-lb/in?2
                      0.600 J/cm?2

                      @Temperature -30.0 ?°C
                      2.86 ft-lb/in?2

                      @Temperature -22.0 ?°F
                      Thermal Properties Metric English Comments
                      CTE, linear, Parallel to Flow 40.0 ?μm/m-?°C

                      @Temperature 20.0 ?°C
                      22.2 ?μin/in-?°F

                      @Temperature 68.0 ?°F
                      CTE, linear, Transverse to Flow 120 ?μm/m-?°C

                      @Temperature 20.0 ?°C
                      66.7 ?μin/in-?°F

                      @Temperature 68.0 ?°F
                      Specific Heat Capacity 1.94 J/g-?°C
                      0.464 BTU/lb-?°F
                      Melt
                      Thermal Conductivity 0.155 W/m-K
                      1.08 BTU-in/hr-ft?2-?°F
                      Melt
                      Deflection Temperature at 0.46 MPa (66 psi) 175 ?°C
                      347 ?°F
                      Deflection Temperature at 1.8 MPa (264 psi) 95.0 ?°C
                      203 ?°F
                      Vicat Softening Point 112 ?°C
                      234 ?°F
                      50?°C/h 50N
                      Electrical Properties Metric English Comments
                      Volume Resistivity 1.00e+12 ohm-cm
                      1.00e+12 ohm-cm
                      Surface Resistance 1.00e+13 ohm
                      1.00e+13 ohm
                      Dielectric Constant 3.8

                      @Frequency 1e+6 Hz
                      3.8

                      @Frequency 1e+6 Hz
                      4.6

                      @Frequency 100 Hz
                      4.6

                      @Frequency 100 Hz
                      Dielectric Strength 40.0 kV/mm
                      1020 kV/in
                      Dissipation Factor 0.028

                      @Frequency 1e+6 Hz
                      0.028

                      @Frequency 1e+6 Hz
                      0.032

                      @Frequency 100 Hz
                      0.032

                      @Frequency 100 Hz
                      Comparative Tracking Index 600 V
                      600 V
                      Processing Properties Metric English Comments
                      Melt Temperature 260 ?°C
                      500 ?°F
                      Injection Molding
                      Mold Temperature 80.0 ?°C
                      176 ?°F
                      Injection Molding
                      Ejection Temperature 105 ?°C
                      221 ?°F
                      Injection Velocity 40.0 mm/sec
                      1.57 in/sec
                      Descriptive Properties Value Comments
                      Effective thermal diffusivity 0.801E-7 m?2/s
                      Melt
                      Copyright ? www.akotv.net All Rights Reserved
                      久草视频在线视频|久草在线视频网站视频|久久草在线视频